background image

Espace Eiffel - Lot D6

19 et 21, Avenue Gustave Eiffel

28630 Gellainville - FRANCE

+33 2 37 33 37 10

[email protected]

EN

DV-71600

AUTO RANGING DIGITAL MULTIMETER

VAR thanks you for purchasing 

DV-71600 

specially designed for electrical values 

measuring.

Please read this manual carefully before each use.

Recommendations

DV-71600 

is a precision tool that has to be used and stored with care, avoiding 

shocks, falls and mistreatments. 

VAR DV-71600 

multimeter complies with CE, IEC/EN 61010-1, CAT II 600V standards, 

double insulation. For your safety, follow the instruction specified in this operating 

manual. Do not use it if insulation is damaged or removed. Do not use the multimeter 

if test leads are damaged or not correctly insulated. An electrical shock may occur.

Replace the battery as soon as the indicator     

appears.  With a low battery, the 

multimeter might produce false readings. Do not apply more that the rated voltage. 

Do not change the measuring range during the testing, it might damage the 

multimeter. Disconnect the test leads before changing the kind of measurement. Do 

not use or store the multimeter in an environment with humidity or high temperature. 

Carefully avoid abrasive and solvent to clean the multimeter.

1/6

Summary of Contents for DV-71600







Reviews: