MU 6100 H
Data memory
ba77077e02
09/2014
69
saving mode switches off functions of the meter that are not required for the
automatic storage of measurement data (such as the display). By pressing any
key the energy saving mode is switched off again.
Terminating the
automatic memory
function prema-
turely
Proceed as follows to switch off the automatic data storing function before the
adjusted storing duration has expired:
11.3 Measurement data memory
11.3.1 Editing the measurement data memory
The contents of the manual or automatic measurement data memory can be
shown on the display and output to the interface.
Each of the measurement data memories has a function to erase the entire
contents.
Editing the data
memory
The memory is edited in the menu,
Storage & config
/
Data storage
. To open the
Storage & config
menu, press the
<OK
_
>
key in the measured value display.
Open the manual or automatic storage directly with the
<RCL>
or
<RCL
_
>
key.
1.
Press the
<STR
_
>
key.
The following window appears.
2.
Using
<
><
>
, select
Yes
and confirm with
<OK>
.
The meter switches to the measured value display.
The automatic data storing function is terminated.
Stop automatic storage?
Yes
No
Warning
15.02.2014
14:15
Back
The settings are explained here using the manual data memory as
an example. The same settings and functions are available for the
automatic data memory.
Summary of Contents for MU 6100 H
