FLASHBAKE
®
/ MICROWAVE OVEN REMOVAL AND REPLACEMENT OF PARTS
Form 24694 (April 2001)
Page 28 of 52
NOISE FILTER BOARD
(Model FBMW3)
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AT THE MAIN
CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT
BOX INDICATING THE CIRCUIT IS BEING
SERVICED.
1.
Remove “MAIN COVER.”
2.
Remove screw securing inlet cover grill and lift
grill out.
3.
Remove screw securing ground wire.
NOTE: This screw has machine threads.
4.
Using a small flat bladed screwdriver, press in
on locking tab and lift up front edge of
assembly and unhook back tab from base
plate.
5.
Disconnect connectors from board.
6.
Reverse procedure to install.
