FLASHBAKE
®
/ MICROWAVE OVEN REMOVAL AND REPLACEMENT OF PARTS
Form 24694 (April 2001)
Page 13 of 52
2.
Remove screw securing top of control panel.
3.
Open oven door.
4.
Lift control panel about 1/8" to disengage tabs
at both sides of panel and notch on bottom
pivot arms.
5.
Allow panel to tilt forward.
6.
Disconnect eight plugs from control board.
CAUTION: When reassembling, be certain all
plugs are correctly mated. If plug is colored,
connect it to same color connector on board.
Failure to connect correctly will result in
damage to unit.
7.
Lift panel and work pivot arms out of holes and
remove panel from unit.
Control Board
1.
Remove "CONTROL PANEL.”
2.
Disconnect connectors going to display board,
LED board and keyswitch board.
3.
Remove five screws securing control board and
remove board.