FLASHBAKE
®
/ MICROWAVE OVEN REMOVAL AND REPLACEMENT OF PARTS
Form 24694 (April 2001)
Page 8 of 52
3.
Remove two screws securing each side of
cover located underneath side of unit.
4.
Slide cover rearward to disengage cover from
front sides of unit.
5.
Carefully lift cover with vent grill off unit.
6.
Reverse procedure to install.
Back Panel
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AT THE MAIN
CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT
BOX INDICATING THE CIRCUIT IS BEING
SERVICED.
1.
Remove "MAIN COVER.”
2.
Remove "POWER CORD.”
3.
Remove screws securing back panel.
4.
Pull bottom of back panel away from unit to
disengage it from bottom panel.
5.
Reverse procedure to install.
Bottom panel
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AT THE MAIN
CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT
BOX INDICATING THE CIRCUIT IS BEING
SERVICED.
1.
Remove screws securing bottom panel.
2.
Disengage bottom panel from back panel and
remove bottom panel.
3.
Reverse procedure to install.
FRONT VENT GRILL
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AT THE MAIN
CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT
BOX INDICATING THE CIRCUIT IS BEING
SERVICED.
1.
Remove screw securing grill on top.
2.
Remove one screw on each side of grill.
3.
Pull grill out front.
4.
Reverse procedure to install.
