FLASHBAKE
®
/ MICROWAVE OVEN REMOVAL AND REPLACEMENT OF PARTS
Form 24694 (April 2001)
Page 10 of 52
CAVITY LAMP AND DAMPER
DOOR ASSEMBLY
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AT THE MAIN
CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT
BOX INDICATING THE CIRCUIT IS BEING
SERVICED.
1.
Remove "UPPER LAMP HOUSING AND
DUCT ASSEMBLY.”
2.
Remove connector from lamp door switch.
3.
Remove connector from lamp socket.
4.
Remove one screw securing assembly to top of
cavity.
5.
Remove two screws securing assembly to top
of magnetron.
NOTE: Screws removed from magnetron are
different.
6.
Disconnect motor connector and thermal fuse
connector.
7.
Undo wire wrap and work wires out.
8.
Remove screw securing lamp socket.
NOTE: Lamp and socket are replaced as one piece.
9.
If door is to be removed, first remove motor
and then remove screw securing bottom of
door.
10. Reverse procedure to install.
DAMPER HOUSING THERMAL
FUSE
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AT THE MAIN
CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT
BOX INDICATING THE CIRCUIT IS BEING
SERVICED.
1.
Remove "UPPER LAMP HOUSING AND
DUCT ASSEMBLY.”
2.
Disconnect thermal fuse connector.
3.
Undo wire wrap and work wires out.
