FLASHBAKE
®
/ MICROWAVE OVEN REMOVAL AND REPLACEMENT OF PARTS
Form 24694 (April 2001)
Page 14 of 52
NOTE: The keypad connector has a locking tab on
each side that must be released in order to
completely disconnect.
4.
Reverse procedure to install.
Keypad Assembly
1.
Remove "CONTROL BOARD.”
2.
Remove “DISPLAY.”
3.
Remove “LED DISPLAY.”
4.
Reverse procedure to install.
Display
1.
Remove "CONTROL BOARD.”
2.
Remove two screws securing display board and
remove board.
3.
Reverse procedure to install.
LED Display
1.
Remove "CONTROL BOARD.”
2.
Remove “DISPLAY.”
3.
Remove two screws securing LED display
assembly and remove assembly.
4.
Reverse procedure to install.
RELAY BOARD
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AT THE MAIN
CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT
BOX INDICATING THE CIRCUIT IS BEING
SERVICED.
1.
Remove "MAIN COVER.”
2.
Remove "CONTROL PANEL.”
3.
Disconnect two blue connectors on wires
coming from relay board.
4.
Disconnect white connector on wires coming
from relay board.
NOTE: Connector CN100 on relay board is not
removable.