4
Power Supply
We recommend a 300W ATX power supply for the DVR unit.
Change from IR mode to GUI mode
Default mode is the wireless IR remote control mode. DVR provides a GUI mode with mouse support. Go to system settings
then running mode. Change from IR mode to mouse mode. The unit will reboot. Be sure to plug in a PS2 mouse in the back of
the unit before or when it is beginning to reboot. Mouse mode is the only mode where a log can be displayed.
2.2 Power On
After complete the installation, you can power on the PC as usual. Live videos should be displayed on VGA screen if
everything is OK.
2.3 Configuration
When you get videos displayed on VGA screen, you can configure the VP-101 PC DVR unit using the IrDA controller comes
with the VP-101 package. Please refer to
Chapter 3, Operating DVR by IrDA controller.
2.3.1 IR Remote Control
Users can operate DVR via IR remote control or local keyboard. There will be a OSD screen on the VGA monitor. Before
operating DVR via IR remote control, please make sure that DVR has connected to the VGA monitor via VGA Out connector.
A.
TV button
Exchange video monitoring from VGA to TV
B. Menu
button
Displays the main menu.
C. Cancel button
Closes the menu and returns to the previous screen.
A
B
C
D
E
F
G
H
I
J
L
M
N
A
K
