10
Quality (All) -
adjusts the video quality for all cameras. The default setting is good. We recommend that you do not set this to
best to avoid using up a significant amount of hard disk space.
Max Connection -
limits the maximum number of connections allowed to access the VP- 101 over the Internet. Set to zero to
allow the maximum number of connections.
Max Bandwidth -
sets the maximum bandwidth in bytes/second that can be used by users connecting to the VP- 101 over the
Internet.
Max Conn. Bandwidth -
sets the maximum bandwidth allocated for each connection to the VP- 101. This is the maximum
bandwidth divided by the maximum connections.
Audio –
Enable or disable audio function
To change the video parameters:
1.
Use the Up and Down arrow buttons on the remote control to highlight the option.
2.
Use the Left and Right arrow buttons to change the value assigned to the setting.
3.
Press the OK button to confirm the new settings.
Each camera has its own video screen. To move between the screens for each camera, use the Prev Page and Next Page buttons
on the remote control.
PTZ Control
Select the type of PTZ cameras used and set each camera that has one connected to Yes. The timeout value represents the time
given to the cameras to respond to a command. Don’t forget to setup PTZ ID.
You can set and recall up to 6 preset configurations for each camera using the following buttons in the PTZ control section:
Preset -
save the current pan, tilt, zoom, and focus settings in one of 6 preset configurations.
