30
Searching for a file
The VP- 101 playback list can be searched for a specific file. You can conduct the search based on time, event, or text.
To search for a recorded file:
1.
While viewing the play list, press the Menu button to display the menu.
2.
Select one of the following options using the Up or Down arrow buttons:
Search by Time -
searches the list of recorded files for the specified recording time.
Search by Event -
searches the list of recorded files for the specified event such as a GPIO trigger or Motion Detection
that occurred within the specified time interval.
Search by Text -
searches the list of files recorded with POS information for specified text that was recorded within the
specified time interval.
3.
Press the Right arrow button to view the submenu for the selected option.
4.
Select each of the options such as Year, Month, Day, and so on using the Up or Down arrows.
5.
Modify the settings as required using the Left and Right arrow buttons.
Note: If you select the Search by Event option, choose an event from GPI 1~16. If you choose the Select by Text
option, enter the text using the Key Pad button.
6.
Press OK when done to conduct the search.
Locking files
To prevent accidental deletion of recorded files, you can lock a file. This also prevents over-writing of the file when the
recording mode is set to Cyclic.
To lock a file:
1.
While viewing the play list, use the Up/Down arrow buttons to select the desired file.
2.
Press the Menu button to display the menu.