53
5.1 Introduction
The VP- 101 can be used and configured using either the supplied remote control unit or with a keyboard and mouse. It
can also be configured over a network using a terminal with a standard web browser. This chapter covers network
operation.
5.2 Connecting
The VP- 101 GUI can be viewed on a standard Internet browser when the device is connected on the same network as
your PC or if it is connected through a cable or xDSL modem to the Internet. Refer to the hardware manual for more
information about making connections using the RJ-45 Ethernet (LAN) port.
Make sure that the VP- 101 is configured for Network running mode. See Running modes on page 5 for more
information.
To access the VP- 101 live video monitoring homepage:
1.
Open a browser window on a terminal that has network access to the VP- 101.
2.
Type the IP address of the VP- 101 in the browser address bar.
The first time you attempt to view the VP- 101 user interface using a web browser, an ActiveX installation procedure
will begin automatically. When the following window appears, click on the Download LVSETUP.EXE link.
The download will begin and the following window will appear.
Default User Name: webmonitor
Default Password: oyo
