66
PCs on the network to find the DVR on the registry server can then use the MAC ID.
Using dial-up Internet
You can set up the DVR for Dial-up Internet access under ISP in the menu system. You must enter your Internet service
provider telephone number, your user name and password. You can also manually configure the TCP/IP.
Note : We strong recommend you not to access dvr using dial-up , it may cause internet drop down.
6.5 Remote access using dial-up
You can access the DVR remotely without the Internet by using a dialup modem. The DVR must be in Network mode.
1.
Connect a dial-up modem and phone line to the DVR.
2.
Set COM1 to modem device in the DVR system menu.
3.
On the remote PC, create a new dial-up setting (Windows).
4.
Set the protocol to PPP.
5.
Clear all advanced options and allowed network protocols except TCP/IP.
6.
Set the IP address for the TCP/IP to 10.0.0.2.
7.
Put a check mark in the server assigned server address box, uncheck the use IP header compression and use
default gateway on the network boxes. Click OK.
8.
Enter the number of the phone line connected to the DVR, as well as the administrator user name and
password.
9.
To access the DVR, use an Internet browser on the PC to access 10.0.0.1.
Note: As this is a PPP connection, only one user can access the DVR at a time.
6.6 UPNP
UPnP allows automatic discovery and control of services available on the network from other devices without user
intervention. Devices that act as servers can advertise their services to clients. Client systems, known as control points,
can search for specific services on the network. When they find the devices with the desired services, the control points
can retrieve detailed descriptions of the devices and services and interact from that point on.
How to enable UPNP support in Windows XP?
1.
Click Start and then click Control Panel.
2.
In Control Panel, double-click Add or Remove Programs.
3. Click
Add/Remove
Windows
Components.
4.
In the Components list, click Networking Services, and then click Details.
5.
Select the Universal Plug and Play check box, and then click OK.
6.
Click Next, and then click Finish.
How to find a UPNP enabled DVR in my Windows XP?
1. Enable the UPNP support in your Windows XP as described in C.
2. Connect your DVR to network and power on your DVR.
3. Use mouse or IR controller to setup a valid unique IP address to this DVR.
