Volvo S 90, Owner'S Manual

Page: 110 / 548

INSTRUMENTS AND CONTROLS
108
Rearview mirror
The interior rearview mirror has an auto-dim
function that helps reduce glare from following
vehicle's headlights.
Auto-dim function
The auto-dim function is controlled by two sen-
sors: one pointing forward (located on the for-
ward-facing side of the mirror, which monitors the
amount of ambient light) and one pointing rear-
ward (located on the side of the mirror facing the
driver at the upper edge, which senses the
strength of following vehicles' headlights), and
work together to help eliminate glare.
NOTE
Obstructing the sensors with e.g., parking
stickers, transponders, etc., or by placing
objects on the seats or parcel shelf in such a
way that light is prevented from reaching the
sensors will reduce the auto-dim function in
the interior rearview mirror and optional auto-
dim function in the door mirrors.
The auto-dim function is always active while the
vehicle is being driven except when the reverse
gear has been selected. The level of sensitivity
for this function can be set to three levels, which
affect the rearview mirror and door mirrors.
NOTE
When the level of sensitivity is changed, this
change will not be noticeable immediately but
will take effect after a short period of time.
The level of sensitivity is set from the center dis-
play:
1. Tap
Settings
in Top view.
2. Tap
My Car Mirrors
.
3. Under
Auto Dim Mirrors
, select
Normal
,
Dark
or
Light
.
Related information
•
Adjusting the power door mirrors (p. 102)
Using sun shades
Both rear doors have integrated sun shades.
There is a sun shade integrated into the rear par-
cel shelf.
Rear doors
Hook and locking mechanism
1. Pull up the sun shade and hook it to the
upper section of the door frame.
2. Lock the sun shade by moving the locking
mechanism upward.
The window can be opened/closed when the sun
shade is being used.