||
LOADING AND STORAGE
208
trained and qualified Volvo service techni-
cian.
Failure to follow the points above could result
in electrical shock and/or serious injury.
Status indication
An LED (Light Emitting Diode) on the socket
indicates its status:
Status indicator light
Socket status
Action
Steady green light
The socket is providing current to a connected device.
None.
Flashing orange light
The socket's voltage converter is too hot (the connected device draws too much
current, etc. or the temperature in the passenger compartment is very high).
Unplug the device, let the converter cool down
and plug in the device again.
The connected device draws too much current (constantly or currently) or is not
functioning properly.
None. The device should not be plugged into the
socket.
Indicator light off
The socket has not detected a plugged in device.
Be sure the device is correctly plugged into the
socket.
The socket is not active.
Put the vehicle's ignition in at least mode
I
.
The socket has been active but has been deactivated.
Start the engine and/or charge the start battery.
If a problem persists, have the socket checked by
a trained and qualified Volvo service technician.
Summary of Contents for S 90
