Volvo S 90, Owner'S Manual

Page: 267 / 548

DRIVER SUPPORT
}}
* Option/accessory, for more information, see Introduction. 265
The
time interval
to the vehi-
cle ahead will only be shown
when two vehicles are dis-
played.
A speed interval will also be
indicated:
•
The higher speed is the one set in ACC
•
The lower one is the speed of the vehicle
ahead (the target vehicle).
Related information
•
Adaptive Cruise Control (ACC)
*
(p. 261)
•
Setting an Adaptive Cruise Control time
interval (p. 267)
•
Deactivating/resuming Adaptive Cruise
Control (ACC) (p. 265)
Deactivating/resuming Adaptive
Cruise Control (ACC)
ACC can be put temporarily in standby mode
and then reactivated.
Function buttons and symbols
To temporarily deactivate and put Adaptive Cruise
Control in standby mode:
–
Press the button (2).
> The
symbol in the instrument panel
will change colors from WHITE to GRAY
and the set speed in the center of the
speedometer will change from BEIGE to
GRAY.
WARNING
When ACC is in standby mode, the driver has
to control the vehicle's speed and distance to
a vehicle ahead.
When ACC is in standby mode, the driver will
be alerted if the distance to the vehicle ahead
is too short by the Distance Alert function.
See the article "Distance Alert" for additional
information.
Standby mode due to action by the driver
ACC is temporarily deactivated and put in
standby mode if:
•
the brakes are applied
•
The gear selector is moved to
N
•
the vehicle is driven faster than the set
speed for more than 1 minute.
In these cases, the driver will have to regulate the
vehicle's speed.
A temporary increase in speed, such as when
passing another vehicle, does not affect the ACC
set speed. The vehicle will return to the set speed
when the accelerator pedal is released.