Volvo S 90, Owner'S Manual

Page: 258 / 548

DRIVER SUPPORT
256
Deactivating/resuming Cruise
Control (CC)
Cruise Control (CC) can be temporarily deacti-
vated and put in standby mode.
Deactivating and putting CC in standby
mode
To temporarily deactivate and put Cruise Control
in standby mode:
Function buttons and symbols (generic illustration)
–
Press the button (2).
> The set speed marker (4) and symbols will
change colors from WHITE to GRAY.
This indicates that CC is temporarily in
standby mode and will not maintain a set
speed.
Standby mode due to action by the driver
CC is temporarily deactivated and put in standby
mode if:
•
the brakes are applied
•
The gear selector is moved to
N
•
the vehicle is driven faster than the set
speed for more than 1 minute.
In these cases, the driver will have to regulate the
vehicle's speed.
A temporary increase in speed, such as when
passing another vehicle, does not affect the CC
set speed. The vehicle will return to the set speed
when the accelerator pedal is released.
Automatic standby mode
CC switches automatically to standby mode if:
•
the wheels lose traction
•
engine speed (rpm) is too high/low
•
brake temperature is too high
•
the vehicle's speed goes below approx.
20 mph (30 km/h)
In these cases, the driver will have to regulate the
vehicle's speed.
Reactivating CC from standby mode
To reactivate CC after it has temporarily been put
in standby mode:
–
Press the button (1).
> The set speed marker (4) will change
color from GRAY to WHITE. The vehicle
will then return to the
most recently set
speed
.
WARNING
There may be a significant increase in speed
after the
button has been pressed.
or