Volvo EC15E, Operator'S Manual

Page: 115 / 238

To connect another bucket: Go on with item 11.
To finish without connecting: Finish following
items 8, 9 & 10..
8 To close the Attachment Quick Coupler, return
the switch to position Neutral (B).
9 Press the bucket against the ground. In this
position, curl the bucket in and out to check that
it is locked in the correct position. If not properly
engaged and firmly locked in working position,
press the switch back to position C to re-open
the attachment quick coupler.
10 To confirm the correct lock and to finish the
process:
Press down the lower end of the switch (A) and
release.
→ The process is finished, when the illuminations
and the beep end.
11 Curl out the attachment quick coupler and hook
it onto the bucket pin.
12 Slowly curl in the attachment quick coupler fully
towards the bucket.
13 To close the Attachment Quick Coupler, return
the switch to position
Neutral
(B).
NOTE!
Before ending the process, always check the
locking indicator whenever available at the quick
attachment coupler, and by mechanical check to
ground to ensure the safe coupling of the
attachment
14 To confirm the correct lock and to finish the
process:
Press down the lower end of the switch (A) and
release.
→ The process is finished, when the illuminations
and the beep end.
NOTICE
Do not use the machine, if the attachment bracket
is not working correctly.
V1087883
Bucket in locked position
Operating techniques
Hydraulic attachment bracket 113