3. Central warning lamp (red)
The lamp lights up when control lamps 5, 7, 8 or 10
light up. The buzzer sounds when control lamp 5
and 8 lights up. If any red control lamp lights up, shut
down the engine immediately, determine the cause
and have the cause of the fault corrected as quickly
as possible, or contact our service department.
4. Offset control lamp (green)
The offset control lamp lights up green after offset
switch on the right hand control lever has been
switched to offset.
If the accessory flow setting menu is activated,
this symbol is flashing, in this case, this means
that we are in settings menu.
The offset control lamp flashes 4 times per second
to indicate one of the mistakes (1, 2 or 3) in X1, X3
or boom offset circuit:
1 Proportional valve mistake
2 Direction selector mistake
3 Mode selector mistake
If the mistake remains, contact a qualified service
technician!
NOTE!
While turning ON the ignition switch or lowering the
arm rest, a neutral detection is performed for the
roller switch on the right control lever. The offset
control lamp blinks when the roller is not in its
neutral position and the proportional function (X1 or
boom offset) is disabled.
The function becomes active (operational) once the
roller comes back to its neutral position.
5. Engine temperature control lamp (red)
The engine temperature control lamp lights up in
case of impermissibly high engine temperatures
and the buzzer sounds.
Shut down the engine, perform trouble shooting,
if necessary contact a qualified service
technician.
6. Preheating control lamp (yellow)
Ignition key in preheating position, the control
lamp lights up and goes out as soon as the
specified operating temperature is reached.
STOP
V 108705 5
V 108705 4
V1085793
Instrument panels
Display unit
35
Summary of Contents for EC15E
Page 6: ......
Page 10: ......
Page 237: ......
Page 238: ...236 Alphabetical index Ref No 20051662 A Volvo Eskilstuna English ...