Volvo EC15E, Operator'S Manual

Page: 112 / 238

1 Remove the linch pin and extract the locking pin.
2 Rotate the locking pin 90° to lock it in extracted
position.
3 Lower the dipper arm into a position where the
attachment bracket connects with the front
bucket pin.
4 Lower the attachment bracket towards the rear
bucket pin. Tilt the bucket rearwards (bucket in)
until the hook on the attachment bracket is in
contact with the rear bucket pin.
5 Position the bucket 20 cm (8 in)above the
ground.
6 Engage the bar in the bucket in the rotating hook
and press it down to fully engage the rear bucket
pin.
7 Lower the bucket to the ground.
8 Rotate the locking pin back 90°.
9 Insert the locking pin.
10 Insert the linch pin through the end of the locking
pin.
11 Check that the bucket is securely fastened by
simultaneously pressing the bucket to the
ground and forward.
Disconnecting bucket
1 Lower the bucket to the ground.
2 Extract the linch pin and the locking pin.
3 Rotate the locking pin 90° to lock it in extracted
position.
4 Position the bucket 10 cm (4 in) above the
ground.
Lower the attachment bracket towards
the rear bucket pin and tilt the bucket
rearwards.
5 Front bucket pin
6 Rear bucket pin
Rotate the locking pin back 90°. Insert
the locking pin. Insert the linch pin
through the locking pin.
1 Locking pin
2 Linch pin
Extract the linch pin and the locking pin.
Rotate the locking pin 90° to lock it in
extracted position.
110
Operating techniques
Attachment brackets