Volvo EC15E, Operator'S Manual

Page: 68 / 238

Mirror setting
Mirrors (optional), adjusting
Rear-view mirrors (optional)
Using rear-view mirrors helps to get more
comfortable visibility without torso rotation. Adjust it
as good surrounding visibility is obtained while
operating.
Measures before and during operation
Walk around the machine and check that there
are no obstacles next to the machine.
Check that mirrors and other visibility-enhancing
devices are in good condition, clean, and
correctly adjusted.
Check that the horn, back-up/travel alarm and
rotating beacon (optional equipment) are working
correctly.
Check if the management has established rules
or procedures for the work site.
Always pay attention around the machine to
identify any obstacles.
Prevent persons from entering or remaining in the
work area, i.e., the area around the machine and
at least 7 m (23 ft) beyond the maximum reach of
the attachment. However, depending on the job
site's organization, the operator may allow a
person to remain in the work area, but must then
observe caution and operate the machine only
when the person can be seen or has given clear
indications of where he or she is.
V1180768
Machine`s right view (mirrors optional)
V1180769
Machine’s top view (mirrors optional)
66
Operating instructions