Volvo EC15E, Operator'S Manual

Page: 34 / 238

Then 4-digit User Code(s) must be programmed
(follow item 5).
The machine can be started with User Code(s) only
(6).
After you are logged in and ignition is off, you can
start the engine again within 15 minutes (Flash
Code 1, armed). If 15 minutes have elapsed (Flash
Code 11, Monitoring), code must be entered again.
If a Master Code is lost, contact a Volvo authorised
dealer.
4. Programming 6-digit Master Code
1 Precondition: No Master Code in memory.
2 Insert ignition key into ignition switch and turn it
to running position (position 1, see page 38 ).
→ Flash Codes 0 (disarmed) and then 10 (factory
mode) appear.
3 Enter key combination for 6-digit Master Code
as shown.
4 Repeat step 3 to confirm.
→ Flash Code 2 (code stored/accepted)
appears.
5 4-digit User Code(s) can be programmed now.
5. Programming 4-digit User Code(s)
1 Precondition: Master Code programmed.
2 Insert ignition key into ignition switch and turn it
to running position (position 1).
→ Flash Code 1 (armed): Still logged in within 15
min. elapse time after ignition off.
→ Flash Code 11 (monitoring): Log in with key
combination for 6-digit Master Code as shown.
3 Enter new key combination for 4-digit User
Code as shown.
→ Flash Code 2 (code stored/accepted)
appears.
4 Repeat step 3 for additional 4-digit User
Code(s).
5 Engine can be started now.
6. Operating
NOTE!
Operating is only possible when you are logged in
with 4-digit User Code!
1 Precondition: Master Code and User Code(s)
programmed.
2 Insert ignition key into ignition switch and turn it
to running position (position 1).
MD
XXXXXX
ENT
V1178591
Key combination for 6-digit Master Code
MD
XXXXXX
ENT
V1178591
Key combination for 6-digit Master Code
MD
XXXX
ENT
V1178592
Key combination for 4-digit User Code
MD
XXXX
ENT
V1178592
Key combination for 4-digit User Code
32
Instrument panels
Instrument panel, left