Volvo EC15E, Operator'S Manual

Page: 142 / 238

Entering, leaving and climbing
the machine
Access to cab
The cab door is fitted with an external door handle
with a lock (1) and an internal door handle.
The door can be locked in open position by
application of manual force (a fixed locking bolt
(3) on the cab engages in the round bolt
receptacle (2) in the door).
By pressing the unlocking button the cab door can
be unlocked and closed.
Always use the three-point approach to access
the cab by using two hands and one foot or one
hand and both feet. Use stepping surfaces and
handholds. Always face the machine when
entering the cab.
Leaving cab
Stop engine and remove key before leaving the
cab to prevent unauthorised use of machine.
Make sure that the cab is parallel to tracks, that
allows best possible leaving situation.
Use the three-point approach to leave the cab by
using two hands and one foot or one hand and
both feet. Use stepping surfaces and handholds.
Always face the machine when leaving the cab.
Do not jump off!
Alternative exit path
The alternative exit path is the rear window (its
location is marked with an information decal). In
case of a turnover or accident and when the door is
blocked, break the glass with the hammer attached
to the rear wall inside the cab.
Never leave the working station to egress even
partially from the cabin or canopy by the front or side
during operation. It is recommended to always bring
the equipment to ground and stop the engine before
entering or leaving the machine for short term job
purposes.
1
2
3
V1089963
V1140429
140
Safety when servicing
Entering, leaving and climbing the machine