Volvo D12, Operator'S Manual

Page: 163 / 214

Maintenance 159
Lacquer and Brightwork Care
Paint
Cab
Wash all exterior painted surfaces fre-
quently to remove dirt. It is especially
important to wash off salt-laden snow and
ice during the cold season. A mild detergent
can be used but avoid strong detergents.
NOTE! Do not aim the water jet directly at
door and window seals or door locks. If
locks are filled with water, use compressed
air to clean the water out and then apply
liquid graphite. Be especially careful of
leaving water in locks or around seals dur-
ing freezing weather.
Wet the surface with water to loosen dirt.
The use of steam or high pressure water
will help in removing loose dirt. Wash the
surface with a sponge using a lot of water
to flush away dirt. Dry the surface with a
towel or chamois. Do not wait until it is
dry as dry-dusting will scratch the surface.
Apply a coat of wax regularly. This will
help the paint and other surfaces keep their
luster. If the surface gets dull, use a restor-
ing cleaner specially designed for this.
Clean off all tar spots and tree sap before
waxing.
When the vehicle is new, allow for enough
time for the paint to cure. Wait about 30
days after the date of manufacture before
putting on the first coat of wax. Never wax
on a hot day under the sun and do not ap-
ply too much pressure with a buffer as
burns may develop from the friction.