manualshive.com logo in svg

Volvo D12, Operator'S Manual

Introducing the YEECORE D12 - your ultimate companion for all your audio needs. Easily learn how to unleash its full potential with our comprehensive User Manual, available for free download at manualshive.com. Discover the enhanced features and step-by-step instructions to optimize your audio experience with the YEECORE D12.

Share
Download
background image

100

Maintenance

EPA Emissions Performance Warranty

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The U.S. Environmental Protection Agency (EPA) and Volvo Trucks North America, Inc.
(VTNA) are pleased to explain the emissions performance warranty on your vehicle. In
compliance with section 207(b) of the Clean Air Act, VTNA must warrant the emission
control system on your vehicle for the periods of time listed listed below, provided there
has been no abuse, neglect or improper maintenance of your vehicle.
This manual contains maintenance information, including time and/or mileage intervals at
which such maintenance should be performed.

Your emission control system may include parts such as carburetor or fuel injection system
and engine computer. Also included may be hoses, belts, connectors or other emission-
related assemblies.
Refer to the Warranty Certificate for complete coverage details.
Federal warranty provisions apply to all vehicles sold in all U.S. states and territories
regardless of whether a state has enacted state warranty provisions that differ from the fed-
eral provisions.
Where a warrantable condition exists, VTNA will repair your vehicle at no cost to you (in-
cluding diagnosis, parts and labor) any emission control device or system which causes a
vehicle to fail an EPA-approved emission short test during its useful life, if you have main-
tained and operated the vehicle in accordance with the written instructions of VTNA.

If a facility at which the vehicle is initially presented for repair is unable for any reason to
honor the claim, then, unless you waive in writing, the repair facility must forward the
claim to VTNA warranty Administration, (336) 393-2000.

MANUFACTURER’S WARRANTY COVERAGE

This warranty is applicable for a period of five years, 100,000 miles or 3,000 hours of op-
eration, whichever first occurs. If an emission-related part of your vehicle is defective, the
part will be repaired or replaced by VTNA.

This is your emission control system DEFECTS WARRANTY.

Summary of Contents for D12























































































































































































































Reviews:

No comments

Related manuals for D12

Westerbeke 55B-FOUR Service Manual preview
55B-FOUR
Brand: Westerbeke Pages: 86
vario helicopter Zenoah G230 Operating Instructions preview
Zenoah G230
Brand: vario helicopter Pages: 4
Idex MICROPUMP EagleDrive MS Installation, Operation And Warranty Information preview
MICROPUMP EagleDrive MS
Brand: Idex Pages: 23
M.T.H. Premier U30C Operator'S Manual preview
Premier U30C
Brand: M.T.H. Pages: 26
BAFANG RM G062.750.D Manual preview
RM G062.750.D
Brand: BAFANG Pages: 6
Yamaha YSE series Service Manual preview
YSE series
Brand: Yamaha Pages: 51
Yanmar 4D92E Service Manual preview
4D92E
Brand: Yanmar Pages: 14
Yanmar YSE12 Service Manual preview
YSE12
Brand: Yanmar Pages: 52
Yanmar 6CXBM-GT Operation Manual preview
6CXBM-GT
Brand: Yanmar Pages: 66
Yanmar 2TNV70 Service Manual preview
2TNV70
Brand: Yanmar Pages: 264
Yanmar 3JH4E Service Manual preview
3JH4E
Brand: Yanmar Pages: 350
Ametek dunkermotoren D258 Operating Manual preview
dunkermotoren D258
Brand: Ametek Pages: 8
YS 91SR S Operator'S Manual preview
91SR S
Brand: YS Pages: 2
YS 61ST-2 Operator'S Manual preview
61ST-2
Brand: YS Pages: 2
YS 140 LIMITED Operator'S Manual preview
140 LIMITED
Brand: YS Pages: 2
Robin America Engine EX40 Parts Manual preview
Engine EX40
Brand: Robin America Pages: 32
Robin America EH72 Instructions For Use Manual preview
EH72
Brand: Robin America Pages: 35
Yanmar 6LT Series Operation Manual preview
6LT Series
Brand: Yanmar Pages: 76

Brands by name

Popular brands

Load more brands