Volvo Penta 47712928, Installation Instructions Manual

Page: 19 / 52

Read through the instructions before you begin to work.
Check that all parts are included in the package.
Illustrations can be used for various instructions.
Therefore, items in illustrations can differ from installation
in progress. The essential information is always correct.
IRS transmitter kit common CAN bus/ separated CAN
buses - Twin installation contains:
(FIG 1A)
Designation Quantity Position
IRS sensor 2 1
IRS DISPLAY 3,5” COLOR TFT 4 5
(XDi96)
Expansion module (AX1) 2 3**
Multi-wiring harness 2 6
11-pole spring loaded terminal 1 4**
(Fig 2A - pos C)
Installation instructions 1 -
Sub kit - Fig 1B (ordered separately )
IGW EVC converter to NMEA2000 1 2
CAN HARNESS 25m/100m 2X2SHF-1* 2 7
Y-split cable 1 8*
IGW: Extension cable 1,5 m Multilink* 1 9
* Harness length depending on individual installation
** In ”Rudder angle sensor for Independent Rudder Sys-
tem, IRS” kit. Instruction 47712927
Connections
Expansion module (AX1) connections (Fig 2B, Pos C)
Pin Marking
Function
1
AGND Analogue GND
2
DIMM/HV3+ Dimmer input/voltage input
3
REF Reference voltage output
4
HI2 Return, current input 2, high
5
HI2+/LIV2+ +Voltage input 2, high-low
6
LIV2- Return, current voltage input 2, low
7
HV2+ +voltage input 2, high
8
HI1- Return, current input 1, high
9
HI1+/LIV1+ +Voltage current input 1, high+low
10
LIV1- Return, current voltage input 1, low
11
HV+ +Voltage input, high
Installation
Display connections (Fig 2B, Pos A, Pos B, Pos F)
Pin Marking Function
1
CAN1GND CAN1 Common
2
CAN1 LOW CAN1 Data low
3
CAN1 HIGH CAN1 Data high
4
+24 V DC
+
Power supply
5
0 V
-
-Power supply 1
S1
CAN1 Term CAN1 termination
S2
CAN2 Term CAN2 termination
6
CAN2 GND CAN1 Common
7
CAN2 LOW CAN1 Data low
8
CAN2 HIG CAN1 Data high
9
+24 V DC
+
Power supply 2
10
0 V -Power supply 2
IRS transmitter kit common CAN bus/ separated CAN
buses Triple installation contains:
(FIG 1A)
Designation Quantity Position
IRS sensor 3 1
IRS DISPLAY 3,5” COLOR TFT 6 5
(XDi96)
Expansion module (AX1) 3 3**
Multi-wiring harness 3 6
11-pole spring loaded terminal 1 4**
(Fig 2A - pos C)
Installation instructions 1 -
IRS transmitter kit common CAN bus / separated CAN
buses Quad installation contains:
(FIG 1A)
Designation Quantity Position
IRS sensor 4 1
IRS DISPLAY 3,5” COLOR TFT 8 5
(XDi96)
Expansion module (AX1) 4 3**
Multi-wiring harness 4 6
11-pole spring loaded terminal 1 4**
(Fig 2A - pos C)
Installation instructions 1 -
Fig 2A, FIG 2B, FIG 2C
A
Slot A (1-5) on display (XDi96)
B Slot B (6-10) on display (XDi96)
C Extension module AX1, slot1-11
D USB port, (software update only)
E Control buttons (1-2-3-4)
F TERMINATION CAN1 and CAN2
NOTICE!
Before installation - ensure suitable locations and
distances between the components.