Volvo Penta 21182210, Operator'S Manual

Page: 89 / 192

Changing and Activating Station
51264a
The gear must be in neutral when changing stations.
The LED above the NEUTRAL BUTTON
3 is lit when
the gear is in neutral (both are lit for twin engines). If
the station that you want to leave is locked, unlock it
(please see next page). Activate the station you want
to change to by pushing the ACTIVATION
BUTTON
1 at that station.
The LED above the ACTIVATION BUTTON indicates
whether the station is active (lit) or inactive (off).
If the PADLOCK SIGN 2 flashes, the station can not
be activated. Another station is either active and
locked or active with the gear engaged.
If the LED above the NEUTRAL BUTTON flashes it
indicates that the gear is in neutral but the control lever
(on the station that is activated) is not in the neutral
position. Move the control lever into the neutral posi-
tion and it will start to function normally. On twin engine
installations, move both control levers.
If either of the LEDs above the ACTIVATION BUTTON
flashes, the station has a fault. A fault pop-up will also
appear in the display(s) to indicate this. For additional
information, please refer to
Acknowledging Alarms
and Messages and to the Fault Code Register .
Locking/Unlocking Stations
51264a
If an active station is locked, it is impossible to change
stations and stop/start the engine from another station.
Lock an active station by pushing the ACTIVATION
BUTTON
1 . Unlock an active locked station by push-
ing the ACTIVATION BUTTON.
The PADLOCK SIGN 2 on the control panel indicates
whether a station is locked (lit) or unlocked (off).
Operation
47700387 06-2009 87