Volvo Penta 21182210, Operator'S Manual

Page: 31 / 192

Trip Page (Button 3)
Single engine installations
50880
Twin engine installations
50881
Enter the TRIP page by pushing button 3 . This display
mode shows:
● TRIP FUEL – Total amount of fuel used since
last time reset (l, Gal).
● TRIP RATE – Average fuel consumption since
last time reset (l/h, Gal/h).
● TRIP HOURS – Operation time since last time
reset (h).
● ENGINE HOURS – Total operating time (h).
This cannot be reset.
When the display is set for a twin engine installa-
tion, the information displayed for each engine will
be the sum of the values from both engines
(except operating time). Operation times for twin
engines are shown separately.
If you want to reset (zero out) the trip values, keep
button
3 pressed for 1 second. The unit beeps and the
values are zeroed.
Graph Page (Button 4)
Single engine installations
50882
Twin engine installations
50883
Enter the GRAPH page by pushing button 4 . In this
display mode, operating information is displayed in the
form of a histograph. Press button
4 repeatedly to
alternate between different operating parameters.
If an item of operating information is not available, that
window cannot be chosen.
If contact with the relevant information is lost during
display, the curve will no longer be drawn, but the line
will continue to scroll across the window.
Data for the port engine or single engine information
is drawn with a black line.
Data for the starboard engine information is drawn with
a gray line.
The maximum time interval can be set to one of the
following values in the configuration menu: 2 min,
10 min, 30 min, 1 h, 2 h, 4 h, 8 h. The scale on the
Y axis is automatically adjusted for best indication.
For additional information, please see Settings – EVC
System Display: Display (Interval) .
Instruments and Controls
47700387 06-2009 29