Neutral Interlock Button
51266a
The neutral interlock button
1
, available on the side-
mount control only, prevents accidentally moving the
throttle out of neutral. This button must be depressed
to shift the throttle out of neutral.
To move the control lever away from neutral:
1.
With the control handle in NEUTRAL, depress the
neutral interlock button
1
.
2.
While keeping the button pressed, move control
handle out of neutral in the desired direction.
Once the throttle is out of the neutral position, you
may release the button.
The neutral interlock will automatically re-engage
when the control handle is returned to the NEUTRAL
position.
Station Handling
Active Station
51504
Shifting, adjusting speed, trimming, and performing
EVC settings and calibrations is only possible on an
active station.
On a boat with one station, the station is always active.
On a boat with two or more stations, the main station
automatically becomes active when the EVC system
is started up with the ignition key(s). If the engine is
started from a secondary station that station automat-
ically becomes active instead.
During engine start the EVC system sometimes
restarts automatically. If this happens, the main
station becomes active even though the start was
performed from a secondary station.
The following instructions apply to both single
engine and twin engine installations. On a single
engine installation, only one LED will light up. On
twin engine installations, both LEDs will light up.
Operation
86
47700387 06-2009
Summary of Contents for 21182210
Page 1: ...OPERATOR S MANUAL 3 0L 5 0L 5 7L 8 1L SX A DPS A ...
Page 95: ...51318 51319 51320 Operation 47700387 06 2009 93 ...
Page 188: ......