Draining the Engine
Draining 3.0L Engines
51720
1.
With the engine turned off, locate and open all
drain points. Raw water drains are blue, hardened
plastic plugs.
NOTICE!
Be sure that all water is drained from
the engine. If no water drains, use a piece of wire
to clear any obstructions from the drain holes.
NOTICE!
If possible, when draining the engine,
raise or lower the bow of the boat to keep the
engine level. This will provide for complete drain-
age of the block and manifold. If the engine is not
level, some water may remain trapped.
2.
After the water has completely drained, reinstall
the drain plugs and tighten securely.
51534–a
3.
Loosen the hose clamps and remove the hoses
from the raw water pump.
51604
4.
Loosen the hose clamp on the large diameter
hose and remove it from the circulation pump.
23772
5.
Loosen clamp
C
and remove hose
D
from fuel
pump. Allow water to drain from hose.
6.
Reinstall all hoses and secure all clamps in the
same orientation as removed.
Engine Shutdown
47700387 06-2009
101
Summary of Contents for 21182210
Page 1: ...OPERATOR S MANUAL 3 0L 5 0L 5 7L 8 1L SX A DPS A ...
Page 95: ...51318 51319 51320 Operation 47700387 06 2009 93 ...
Page 188: ......
