Calibration and Settings
This section contains instructions for configuring EVC
and EVC system display settings.
NOTICE!
If using a Volvo Penta fuel level sensor and/
or multisensor, ensure that fuel tank calibration and
depth alarm settings are performed correctly before
starting to operate the boat for the first time.
EVC Settings
51285b
EVC settings can only be performed in the Settings
menu of the EVC Basic Window (the LCD display of
the tachometer). The EVC Basic Window is operated
with buttons on the EVC Control Panel.
To access the EVC Basic Window from the EVC Sys-
tem Display, press button
2
to enter page MULTI.
Push repeatedly until the EVC Basic Window is dis-
played. For additional information, please see
MULTI
Page (Button 2)
in the section entitled
Multiple Window
Display
.
Entering the Settings Menu
51264
Most settings can only be performed if the station is
activated. Activate the station with the ACTIVATION
BUTTON
8
. For additional information, please see
Station Handling
in the chapter entitled
Operation
.
1.
For twin engine installations, select which dis-
play (engine) to activate. Use the DISPLAY
SELECTION WHEEL.
2.
When in main menu, turn the SELECTION
WHEEL to highlight Settings.
3.
Push the SELECTION WHEEL to enter the Set-
tings menu.
4.
Push the BACK BUTTON
5
to return to the
MAIN MENU.
For further settings instructions please refer to
Set-
tings Menu
in the chapter entitled
Instruments and
Controls
.
47700387 06-2009
159
Summary of Contents for 21182210
Page 1: ...OPERATOR S MANUAL 3 0L 5 0L 5 7L 8 1L SX A DPS A ...
Page 95: ...51318 51319 51320 Operation 47700387 06 2009 93 ...
Page 188: ......
