VoloFone™ VF100
User Manual
Copyright © Vololink Pty Ltd 2006-08
V1.1 Jan 2008
Page 24 of 50
Example
In this example, port forward is used to allow incoming access to an internal web server.
Configuration Item
Explanation
Server IP: 192.168.0.100
The IP address of the server on the internal network where the port
will be forwarded.
Server Port: 8080
The port number on the internal server.
Protocol: TCP
The protocol to be forwarded.
NAT Port: 80
The port number on the VoloFone
™ VF100 to be forwarded.
Telephone
To configure how the attached telephone works, select
Telephone
from the Navigation panel - the
Telephone
page is displayed:
Telephone Settings
The following settings can be configured:
Volume
This is the handset earpiece volume (1- quietest, 4
– loudest).
DTMF Dial Timeout
Define the time from dialling to call setup. This is the time lag between when
you finish keying the number to call, and when the phone starts to dial. The
timeout range is between 2 and 10 seconds. The default setting is 3 seconds.
Country/Region
Select from the drop-down list.
