VoloFone™ VF100
User Manual
Copyright © Vololink Pty Ltd 2006-08
V1.1 Jan 2008
Page 23 of 50
You will need to obtain the following information from the administrator of the remote server:
Remote Host Address
Remote Network Address
Remote Network Mask
Remote Network Gateway
Authentication Key
– A Pre-Shared Key (PSK)
Port Forward
Port forward is used to allow an external user to reach a port on a private IP address (inside a LAN) from
the outside via a NAT-enabled router (VoloFone
™ VF100).
When a computer on the Internet sends data to the public IP address of the VoloFone
™ VF100, it needs to
know how to manage the data. Port Forward tells the VoloFone
™ VF100 which computer on the local area
network to send the data to.
To configure
Port Forward
select
LAN
followed by
Port Forward
in the Navigation panel - the
Port
Forward
page is displayed:
Enter the
Server IP
address and
Server Port
, select the
Protocol
from the drop-down list, and enter
the
NAT Port
then click the
Add
button.
