Vololink VoloFone VF100 User Manual Download

Page: 17 / 50

VoloFone™ VF100

User Manual

V1.1 Jan 2008

Page 16 of 50

The following is a sample list of local (Australian) Access Points. For further information contact your
Internet Service Provider.

Table of Access Point Names

ISP

Network

APN

Optus

internet

Optus Data Only

Optus

connect

Telstra

Telstra (2G)

telstra.wap

Telstra

Telstra (3G)

telstra.internet

Telstra

Telstra (3G data bundles)

telstra.datapack

Telstra

Telstra (Pay by time)

pcpack

Three

3netaccess

Vodafone

vfinternet.au

The rest of this section covers items that you may wish to view or change.

SIM

To access the SIM options, click

SIM

in the navigation panel

– the

SIM

page appears.

Use this page is to manage the function of the PIN. From this page you can:



Enable/Disable Power-on PIN Lock



Change the PIN

If the

Power-on PIN Lock

is disabled,

Change PIN

is not available.

Power-on PIN Lock

To configure Power-on PIN Lock proceed as follows:



Click the drop-down list next to

Ask for SIM PIN at Power Up

and select

Enabled

then click the

Apply

button

You are then prompted to enter the

Current PIN

as confirmation:

Summary of Contents for VoloFone VF100



















































Search results

Summary of Contents for VoloFone VF100

Reviews:

Related manuals for VoloFone VF100

Brands by name

Popular brands

Vololink VoloFone VF100, User Manual

Search results

Summary of Contents for VoloFone VF100

Reviews:

Related manuals for VoloFone VF100

Brands by name

Popular brands