Vololink VoloFone VF100 User Manual Download

Page: 29 / 50

VoloFone™ VF100

User Manual

V1.1 Jan 2008

Page 28 of 50

You can configure Call Barring for:

Call Type

Setting

Explanation

All Calls

Disable Call Barring for All Calls

No Call Barring is active.

Incoming Calls

All Incoming Call Barring Disabled

No Call Barring is active for All
Incoming Calls to the VoloFone

™.

All Incoming Calls Barred

All Incoming Calls to the VoloFone

™

are Barred.

All Incoming International Calls when
Roaming Barred

All Incoming International Calls are
barred when the VoloFone

™ is

Roaming.

Outgoing Calls

All Outgoing Call Barring Disabled

No Call Barring is active for All
Outgoing Calls from the VoloFone

™.

All Outgoing Calls Barred

All Outgoing Calls from the
VoloFone

™ are Barred.

All Outgoing International Calls
Barred

All Outgoing International Calls from
the VoloFone

™ are Barred.

All Outgoing International Calls
except to Home Country Barred

All Outgoing International Calls from
the VoloFone

™ are Barred except

those to your Home Country.

To configure these settings, use the drop-down list to select the action, enter the Password and click
the

Apply

button. You will need to obtain the password for Call Barring from your service provider.

Configuring Supplementary Services using the Phone Keypad

Introduction

Support of Supplementary Services is dependent on the cellular module (USIM) installed in the

VoloFone

™ VF100 and also on the network. For this reason, all of the documented services may not be

available.

The VoloFone

™ VF100 supports the following list of Supplementary Services.



Inbound Caller ID



Outbound Caller ID



Call Waiting



Call Forwarding



Call Barring



Multi-party Calls



Call Transfer



Call Holding



Call Waiting

Throughout this section the instructions will refer to the

Flash

key on the telephone. Not all telephones

have a Flash key, however, briefly pressing the On/Off hook button (also known as the Talk button) on
the telephone has the same functionality as the Flash key.

When you see this icon

in the instructions, lift the telephone handset Off Hook.

When you see this icon

in the instructions, replace the telephone handset On Hook.

Keypad commands will work with a DTMF capable (tone dialling) phone only.

Summary of Contents for VoloFone VF100



















































Search results

Summary of Contents for VoloFone VF100

Reviews:

Related manuals for VoloFone VF100

Brands by name

Popular brands

Vololink VoloFone VF100, User Manual

Search results

Summary of Contents for VoloFone VF100

Reviews:

Related manuals for VoloFone VF100

Brands by name

Popular brands