VoloFone™ VF100
User Manual
Copyright © Vololink Pty Ltd 2006-08
V1.1 Jan 2008
Page 22 of 50
Settings
To view or edit the
LAN Settings
select
LAN
followed by
Settings
in the Navigation panel - the
LAN
Settings
page appears:
Most users will not need to change anything on this page. However, if necessary, you can define the
IP
Address
and
Netmask
of the VoloFone
™ VF100 as well as Enable or Disable the
DHCP Server
together
with the
IP Range
(assigned by the DHCP Server) and the
Lease Time
of the IP Address.
The
VoloFone™ VF100 incorporates a DHCP server that assigns dynamic IP addresses to local clients
(computers connected to the VoloFone™ VF100). The IP addresses are allocated from the predefined
range of addresses defined on this page. The default address range is suitable for most local networks.
The DHCP server allocates the IP address for the term of the Lease Time defined on this page. The lease
is the amount of time that an IP address is valid for a specific device. If the lease expires and the device is
still connected, the lease is automatically renewed.
VPN
The VoloFone
™ VF100 can be configured as a
VPN
(Virtual Private Network) Host. To do this, proceed as
follows:
Select
LAN
followed by
VPN
in the Navigation panel - the
VPN
Page appears:
Select
Enabled
from the drop-down list.
Click the
Apply
button - the
VPN
page reappears with the
VPN
configuration items ready for you to
complete.
