Memory function
Fig. 92
On the outside of the driver seat: memory buttons.
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
The memory buttons can be used to store and recall settings for the driver seat and the exterior
mirrors.
Memory buttons
You can assign individual settings for the driver seat and exterior mirrors to each of the memory
buttons.
Storing driver seat and exterior mirror settings for driving forwards
• Switch on the electronic parking brake.
• Put the gearbox into neutral.
• Switch on the ignition.
• Adjust the driver seat and exterior mirror.
• Press the
button for longer than one second
⇒
Fig. 92
.
• Press the desired memory button within approximately ten seconds. A gong signal will sound to
confirm that the settings have been saved.
Storing front passenger exterior mirror settings for reversing
• Switch on the electronic parking brake.
• Put the gearbox into neutral.
• Switch on the ignition.
• Press the desired memory button.
• Select reverse gear.
• Adjust the exterior mirror on the front passenger side so that you have a good view of the kerb
area.
• The settings for the mirror position will be saved automatically and assigned to the vehicle key
that is used to unlock the vehicle.
Accessing driver seat and exterior mirror settings
• While the vehicle is stationary and the ignition is switched on, briefly touch the required memory
button.
•
OR:
while the ignition is switched off, press and hold the required memory button until the
saved position is reached.
• The front passenger exterior mirror will leave the stored reversing position automatically if the
vehicle drives forwards at a minimum speed of 15 km/h (10 mph) or if you turn the rotary knob
from
R
to a different position
⇒
Mirrors
.
Electric convenient entry and exit function
When the driver door is opened, the front seat automatically moves to a position that makes it easy
to enter and exit the vehicle.
The driver seat moves back to its original position automatically as soon as the driver door is closed
and the ignition is switched on.
The electric convenient entry and exit function can be switched on and off in the Infotainment
system
⇒
Operation and display in the Infotainment system
.
Personalisation
You can save and access your individual seat setting in a user account via the Personalisation
function
⇒
Personalisation
.
After switching off the ignition and locking the vehicle, the driver seat and exterior mirror settings
are stored in the user account.
The driver seat and exterior mirror settings are opened again after the vehicle is unlocked and the
driver door is opened.
The seat responds to selecting or changing a user account as follows:
1)
