Start new lap.
Display split time.
Display statistics.
Opening the lap timer
To access the lap timer, first open the performance monitor
⇒
Performance monitor
:
• Press the
MENU
button on the Infotainment system.
• Touch the
Vehicle
function button.
• Touch the
Selection
function button.
• Touch the
Sport
function button to access the performance monitor.
• Touch one of the arrow buttons
⇒
Fig. 27
②
in the performance monitor to change to the lap
timer.
You can change between the lap timer and performance monitor at any time using the arrow
buttons
⇒
Fig. 27
- 2-
and
⇒
Fig. 28
.
Measuring lap times
The stopwatch measures the lap time in two areas:
The red needle and the numerical value in the centre show the running time in seconds. The
smaller display in the inner area shows minutes and hours.
The display on the right side shows the current lap time with an accuracy of 1/100 seconds. There
is no difference between the stopwatch and lap times if there are not yet any laps with intermediate
times stored in the lap timer.
Function
Operation
Start or continue
time measurement
Touch the function button to start or continue
⇒
Fig. 29
④
.
Time measurement is not possible when the ignition is switched off. A
message is shown on the display.
Press
Start
to start time measurement. Time measurement starts as soon
as the vehicle moves forwards.
A new first lap can be started when the data in the statistics has been
reset.
End time
measurement
Touch the function button to end measurement
⇒
Fig. 29
⑥
.
Pause time
measurement
Touch the function button to pause measurement
⇒
Fig. 29
⑦
.
Start new lap
Touch the function button to add a new lap
⇒
Fig. 29
⑧
.
The last lap time is stored and a new lap starts. The overall time of the
laps driven is shown in the statistics.
Cancel current lap
Touch the function button to cancel the current lap
⇒
Fig. 29
⑤
.
During a running time measurement, touch the function button to pause
measurement
⑦
. Time measurement is cancelled and the lap time
is deleted.
--: --:--.--
is displayed in the statistics.
Display
intermediate time
Touch the function button for the intermediate time
⇒
Fig. 29
⑨
.
The stopwatch
⇒
Fig. 28
①
stops for a few seconds and the intermediate
time is displayed.
Display statistics
After ending or cancelling time measurement, touch the function button for
the statistics
⇒
Fig. 29
⑩
.
The statistics show the number of laps, the overall time, the fastest and
slowest laps, the average value of all lap times and all lap values.
Touch the
function button to go back to the previous menu.
Reset data in the
statistics
Touch the function button for statistics
⇒
Fig. 29
⑩
. Delete the data
by touching the
Reset
function button.
A maximum of 99 laps and a maximum time of 99 hours, 59 minutes and 59 seconds can be
recorded. If one of these limits has been reached, the data in the statistics must be deleted before a
further time measurement.
Avoid operating the lap timer when the vehicle is in motion if possible.
• Preset lap timer settings and access statistics only when the vehicle is stationary.
• When the vehicle is in motion, use the lap timer only in driving situations which are
easy to control.
WARNING
