• Easy Open: open the boot lid by moving a foot underneath the rear bumper
⇒
Boot lid
.
• Easy Close: automatically closes the boot lid.
• Lock the vehicle via the sensor.
The vehicle unlocking procedure is confirmed by all the turn signals flashing
twice
and the locking
procedure by the turn signals flashing
once
.
If the vehicle is locked and then the doors and boot lid are closed, and the most recently used
vehicle key is located inside the vehicle, it will
not immediately
lock properly. All turn signals flash
four times
.
Unlocking and opening the doors
• Touch the sensor surface
⇒
Fig. 66
on the inside of the driver or front passenger door
handle.
• Open the door.
Closing and locking the doors
• Switch off the ignition.
• Close the driver or front passenger door.
• Touch the sensor
⇒
Fig. 66
on the outside of the driver or front passenger door handle
once
.
On vehicles with SAFELOCK: closing and locking doors
• Switch off the ignition.
• Close the driver and front passenger door.
•
Locking with SAFELOCK:
touch the sensor surface on the outside of the driver or front
passenger door handle
once
.
•
Locking without SAFELOCK:
touch the sensor surface on the outside of the driver or front
passenger door handle
twice
.
Locking and unlocking the boot lid
If the vehicle is locked and a valid vehicle key is located within the operating range
⇒
Fig. 66
of the boot lid, the boot lid automatically unlocks when you open it with the handle button.
The boot lid is locked automatically after it is closed. If the vehicle is completely unlocked, the boot
lid will
not
lock automatically when closed.
Temporarily deactivating Keyless Access
• Lock the vehicle with the
button on the vehicle key.
• Also lock the vehicle using the door sensor within five seconds.
• The keyless locking and starting system Keyless Access is temporarily deactivated.
The vehicle can be unlocked only using the vehicle key.
Keyless Access is reactivated the next time the vehicle is unlocked.
Convenience functions
To use
convenience closing
for all of the electric windows and the glass roof, hold your finger on
the sensor on the outside of the driver or front passenger door handle for a few seconds until the
windows or the glass roof have closed.
The sensors' functions can be adjusted in the
Vehicle settings
menu in the Infotainment system
⇒
Operation and display in the Infotainment system
.
It may not be possible to lock or unlock the vehicle using keyless access if the 12-volt vehicle
battery or button cell in the vehicle key is weak or discharged. The vehicle can be locked or
unlocked manually
⇒
Unlocking or locking the driver door manually
.
The unlock function is deactivated for a few seconds so that you can check that the vehicle
has been locked properly.
If the message
Keyless fault
appears on the instrument cluster display, there may be a
malfunction in the Keyless Access system. Go to a qualified workshop.
Please note that the sensor surfaces in the door handles could be activated by a powerful
jet of water or steam if a valid vehicle key is in the operating range at the same time. If at
least one window is open and sensor surface in a door handle is continuously activated,
all windows will close. It is possible that all windows will open if the jet of water or steam is
moved away from a door handle sensor surface briefly and then moved back onto it
⇒
Central locking system
.
NOTICE
