• Stop when the red line reaches the rear limit
④
.
Parking parallel to the road (mode 2)
Fig. 156
Infotainment system display: rear view camera system, mode 2.
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
Key to
⇒
Fig. 156
:
Road.
Obstacle or auxiliary box.
Side limit of the parking space.
Obstacle or auxiliary box.
Driving into a parking space
• If applicable, press the
button before driving past the selected parking space.
• With the rear view camera system switched on and operational, select mode 2
.
• Activate the turn signal for the side of the street on which you want to park.
• Position the vehicle parallel to the parking row at a distance of around one metre.
• If obstacles protrude from the auxiliary boxes, look for a new parking space or reposition the
vehicle.
• Select reverse gear. A red frame shows the target position of your vehicle.
• Turn the steering wheel so that the red frame moves between the auxiliary boxes and turns
green. Hold the steering wheel in this position and start moving slowly.
• Reverse when an arrow appears. Yellow and green lines are displayed. The arrow shows the
distance still to be covered.
• Leave the steering wheel in the set position while reversing. Make necessary changes to the
steering angle when a steering instruction is displayed next to the steering wheel symbol
.
• Reverse until the stop sign is displayed or the green line is aligned with the side limit of the
parking space.
• Stop the vehicle. Steer in the opposite direction until the steering lock is reached.
• Reverse until the stop symbol is displayed or until the red line reaches the rear limit.
Troubleshooting
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
No camera visibility, error message, system switches itself off
• Clean the camera or remove stickers or accessories from the camera
⇒
Caring for and cleaning
the vehicle exterior
.
• Check whether any damage is visible.
The system is not responding as expected
• The camera is dirty
⇒
Caring for and cleaning the vehicle exterior
. The camera visibility may be
impaired by dirt and snow or also residue from cleaning agents or coatings.
• The system requirements must be met
⇒
Prerequisites
.
• The camera is covered by water.
• The factory-fitted towing bracket is electrically connected with the trailer
⇒
Trailer towing
.
• The vehicle is damaged in the area around the camera, e.g. caused by parking collisions.
• The detection range of the camera is blocked by add-on parts, e.g. bicycle carriers.
