Fig. 16
Next to the steering wheel: Head-up Display control (arrow).
Fig. 17
On the dash panel above the steering wheel: examples of information shown in the Head-
up Display.
Switching the Head-up Display on or off
Press the control
⇒
Fig. 16
to switch the Head-up Display on or off.
Adjusting the height
Proceed as follows to adjust the height of the Head-up Display and individually adapt the angle:
• Assume an optimum sitting position
⇒
Sitting position
.
• Use the control
⇒
Fig. 16
to adjust the height of the Head-up Display as required.
Setup in the Infotainment system
You can configure additional setup parameters for the Head-up Display in the Infotainment system.
To open the
Head-up Display settings
menu, press the
button or function button and
touch the
Vehicle
,
and
Head-up Display
function buttons.
The following settings are available:
• Adjust the Head-up Display brightness. If the surroundings become darker, the display
brightness is automatically dimmed. The basic brightness is adjusted together with the
instrument and switch lighting
⇒
Operation and display in the Infotainment system
.
• Select the desired colour scheme. You can choose between a standard colour scheme and an
alternative colour scheme.
• Select the content of the Head-up Display, e.g. Adaptive Cruise Control or Infotainment system.
Some content cannot be deactivated, e.g. warning messages.
Sun glasses with polarisation filters and unfavourable lighting conditions may impair the
effectiveness of the display.
The ideal position to read the Head-up Display depends on your seat position and the height
setting of the Head-up Display.
Some settings can be saved in the user accounts of the personalisation function and
therefore change automatically when the user account is changed
⇒
Personalisation
.
Displays
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
Possible instrument cluster displays
• Open doors, bonnet and boot lid.
• Warning and information messages
• Mileage displays
The Head-up Display may detach from the guide rail as a result of applying excessive
pressure, e.g. during cleaning.
• Do not apply excessive pressure when cleaning the Head-up Display.
NOTICE
To avoid scratching the cover panel, do not place objects in the slot of the Head-
up Display.
NOTICE
