Fig. 139
On the left of the steering column: switch and buttons for operating the speed limiter.
Fig. 140
On the instrument cluster display: speed limiter status displays (illustration).
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
Key to
⇒
Fig. 140
:
Control active, stored speed displayed in large figures.
Control interrupted, stored speed shown small or darkened.
Switching on
• Move switch
⇒
Fig. 139
②
to position
.
The speed last set is stored. No control yet.
Starting control
• Press button
⇒
Fig. 139
①
in the area
while driving.
The current speed is stored as the maximum speed. The green indicator lamp
.
Setting the speed
You can adjust the stored speed by means of the button
⇒
Fig. 139
①
:
(short)+ 1 km/h (1 mph)
(short)- 1 km/h (1 mph)
Press and hold button
⇒
Fig. 139
①
to continuously change the stored speed.
Resuming control
• Press button
⇒
Fig. 139
①
in area
.
The speed limiter is activated again as soon as the current speed is lower than the stored speed.
Switching off
• Move switch
⇒
Fig. 139
②
to position
.
The speed limiter is switched off and the speed remains stored (also after the ignition is switched
off).
Operating the speed limiter via the multifunction steering wheel
Fig. 141
Left-hand side of the multifunction steering wheel: buttons for operating the speed limiter.
First read and observe the introductoryinformation and safety warnings
⇒
Introduction
Switching on
• Press the
or
button.
The speed last set is stored. No control yet.
Starting control
• Press the
button while driving.
