manualshive.com logo in svg

Volkswagen Passat 2011, Maintenance Manual, Page: 175 / 188

Share
Download
Volkswagen Passat 2011 Maintenance Manual Download Page 175

♦ Gas leak detector - VAS 523 003-

♦ Mirror
♦ Battery lamp - VAS 6901-

♦ Leak detecting spray

WARNING

For reasons of safety, service and maintenance of the natural

gas system may only be meticulously carried out by specially

trained personnel.
Natural gas is highly flammable and, in combination with air,

creates a combustible mixture.
There must be no open flame or source of ignition near the

natural gas system.
Inhaling  natural  gas  can  lead  to  light-headedness  and  lung

damage. High concentrations may lead to suffocation due to

lack of oxygen.
Natural gas is NOT odourless because a gas having a strong

odour is added.

Condition for testing:
♦ All parts of the natural gas system to be checked must be

reached easily.

♦ The exhaust gas warning lamp in the dash panel insert must

not light up and there must be no entries concerning natural

gas in the event memory of the engine control unit.

♦ Working environment free of draught

Passat 2011 ➤ , Passat Variant 2011 ➤

Maintenance - Edition 01.2019

4. Descriptions of work:    

171

Summary of Contents for Passat 2011





























































































































































































Reviews:

No comments