manualshive.com logo in svg

Volkswagen Passat 2011, Maintenance Manual, Page: 134 / 188

Share
Download
Volkswagen Passat 2011 Maintenance Manual Download Page 134

Windscreen spray jet settings:
The spray jets are preset. However, small differences in height

may be corrected.

– If both spray fields are not at same height, adjust spray direc‐

tion upwards or downwards as follows:

1 - Cowl panel in front of windscreen
2 - Adjusting tool
3 - Fan jet
4 - Bonnet
– Adjust the washer jet -3- by turning the adjuster -2- using a

suitable screwdriver.

♦ “Clockwise” lower.
♦ “Anti-clockwise” higher.
Rear window spray jet setting:

– Adjust spray jet using adjusting tool - T10564- or adjusting tool

- T40187- so that the water jet sprays onto the upper third of

rear window.

4.46.3

Headlight washer system: checking

spray jet settings

Caution

Only control function of spray jets but do not adjust them.

Passat 2011 ➤ , Passat Variant 2011 ➤

Maintenance - Edition 01.2019

130

    4. Descriptions of work:

Summary of Contents for Passat 2011





























































































































































































Reviews:

No comments