Call Transfer
43
SINGLE
LINE
TELEPHONE
To make a PBX/Centrex Transfer:
1.
Press the FLASH button. An intercom dial tone will sound.
2.
Dial [660]. A Flash command is presented to the PBX or Centrex CO
Line (a stutter tone will sound).
3.
Dial the desired telephone number.
4.
Replace the handset to complete the transfer.
Screened Transfer
To conduct the transfer, while connected to an outside line:
1.
Press the station button where call is to be transferred (if
programmed on your telephone) or press TRANS and dial station
number.
The called extension signals according to the selected intercom H,
T, or P mode.
2.
When that extension answers, announce the transfer.
3.
Hang up to complete the transfer.
To answer the Screened Transfer:
Your intercom will be signaling according to the selected intercom H-T-
P mode.
1.
Answer the intercom and receive the transfer notice.
2.
Press OUTSIDE LINE or flashing LOOP button on hold.
If Direct Transfer is enabled, the screened transfer will
go directly to the handset. You do not have to press a
LINE or LOOP button to answer.
Summary of Contents for XTS Station
Page 1: ...Vodavi Telephone Systems Station User Guide January 2005 Issue 2 0 P N 3152 00...
Page 10: ...viii Station User Guide 8 Button Executive Telephone 11 12 2 3 4 6 5 7 9 8 13 10 1...
Page 12: ...x Station User Guide 8 Button Enhanced Telephone Non Display 2 1 4 3 5 6 9 10 7 8...
Page 18: ......
