Volume Control
109
SINGLE
LINE
TELEPHONE
The volume control on the Single Line Telephone is located on
the right side of the telephone. The slider switch options are HI
for loud volume, LO for low volume, and OFF to turn the ringer
off. Two-line models have a volume switch for each line. Certain
models do not have an OFF option.
Speakerphone Models
-- have a sliding volume switch to adjust
speakerphone volume. Slide the switch toward you for lower
volume or away from you for increased speakerphone volume.
Handset Volume
-- each SLT has a volume button that can be
pressed to increase or decrease the handset volume.
B/Z Ringer Switch
-- is located on the bottom of the telephone
near the line jacks. This switch should be set to the Z mode for
business/hospitality applications and to the B mode for
residential applications.
To change volume system setting:
For SLTs not equipped with a volume control slider switch, or to
increase the volume greater than that allowed by the slider
switch, use the following steps:
1.
Dial [638].
2.
Dial a valid number (0-9) to select a volume level.
3.
Press HOLD.
The MSG light and the Line In Use (LIU) LEDs will not
operate when set in the B ringer mode.
Summary of Contents for XTS Station
Page 1: ...Vodavi Telephone Systems Station User Guide January 2005 Issue 2 0 P N 3152 00...
Page 10: ...viii Station User Guide 8 Button Executive Telephone 11 12 2 3 4 6 5 7 9 8 13 10 1...
Page 12: ...x Station User Guide 8 Button Enhanced Telephone Non Display 2 1 4 3 5 6 9 10 7 8...
Page 18: ......