42
Call Transfer
SINGLE
LINE
TELEPHONE
To use Group Call Pickup:
1.
Lift the handset.
2.
Dial [#0]. You will be connected to the incoming intercom or
outside line call.
Call Transfer
Outside lines can be transferred from one phone to another within the
system. The transfer can be either screened (announced) or unscreened
to either an idle or busy station, an ACD/UCD Group, or a Hunt Group.
Outside line calls can also be transferred to another outside destination
by using a
trunk-to-trunk transfer.
Executive/Secretary Transfer
If you are designated the:
Executive station, and your phone is busy or in DND, all calls
will be routed to the Secretary station.
Secretary station, you can signal the Executive that is busy or
in DND by using the Camp On feature.
PBX/Centrex Transfer
While connected to an outside line (PBX/Centrex):
1.
Press FLASH. The transfer dial tone sounds.
2.
Dial the PBX/Centrex station number.
3.
Hang up to complete the transfer.
You must be in the same Pickup group as the ringing
telephone to pickup the call.
You MUST have access to the specific outside line or
LOOP button to use Group Call Pickup.
Summary of Contents for XTS Station
Page 1: ...Vodavi Telephone Systems Station User Guide January 2005 Issue 2 0 P N 3152 00...
Page 10: ...viii Station User Guide 8 Button Executive Telephone 11 12 2 3 4 6 5 7 9 8 13 10 1...
Page 12: ...x Station User Guide 8 Button Enhanced Telephone Non Display 2 1 4 3 5 6 9 10 7 8...
Page 18: ......
