64
Headset Mode
Headset Mode
A modular headset may be used by connecting the headset to the
handset jack on the keyset (leaving the handset in place). A headset can
also be connected to the 2.5 mm jack that is located on the left side of
most Vodavi digital telephone models. The ON/OFF button on the
digital telephone (SPEAKER button on IP Phone) is used to initiate and
end calls while using the headset.
To activate Headset Mode:
Dial [634] on the dial pad,
-or-
Press the
preprogrammed
HEADSET MODE button.
-or-
Use the Soft Key’s HEADSET option when in an idle condition.
The LED will light steady.
To deactivate Headset Mode:
Dial [634] on the dial pad,
-or-
Press the
preprogrammed
HEADSET MODE button.
-or-
Use the Soft Key’s HEADSET option when in an idle condition.
The LED will extinguish.
While Headset mode is active, the ON/OFF button
SPEAKER button on the IP Phone) activates the headset
and disables speakerphone and intercom call
announce operation at your station.
To install the headset, see the Installation Manual.
Station must be programmed in database
programming for headset operation before the flexible
button can be programmed.
Summary of Contents for XTS Station
Page 1: ...Vodavi Telephone Systems Station User Guide January 2005 Issue 2 0 P N 3152 00...
Page 10: ...viii Station User Guide 8 Button Executive Telephone 11 12 2 3 4 6 5 7 9 8 13 10 1...
Page 12: ...x Station User Guide 8 Button Enhanced Telephone Non Display 2 1 4 3 5 6 9 10 7 8...
Page 18: ......
