Vodavi Digital telephone User Manual Download

Page: 77 / 130

Headset Mode

To activate Headset Mode:

Dial [634] on the dial pad,

-or-

Press the

preprogrammed

HEADSET MODE button.

-or-

Use the Soft Key’s HEADSET option when in an idle
condition.

The LED will light steady.

To deactivate Headset Mode:

Dial [634] on the dial pad,

-or-

Press the

preprogrammed

HEADSET MODE button.

-or-

Use the Soft Key’s HEADSET option when in an idle
condition.

The LED will extinguish.

SINGLE

LINE

TELEPHONE

Not applicable

While Headset mode is active, the ON/OFF button
activates the headset and disables speakerphone
and intercom call announce operation at your
station.

To install the headset, see the Installation Manual.

Station must be programmed in database
programming for headset operation before the
flexible button can be programmed.

Summary of Contents for Digital telephone



































































































































Search results

Summary of Contents for Digital telephone

Reviews:

Related manuals for Digital telephone

Brands by name

Popular brands

Vodavi Digital telephone, User Manual

Search results

Summary of Contents for Digital telephone

Reviews:

Related manuals for Digital telephone

Brands by name

Popular brands