Vodavi Digital telephone User Manual Download Page 109

Page: 109 / 130

Software Version

Software Version

The current system software version can be viewed. The display
shows the version number and level of software.

To view the Software Version Display:

Dial the S/W Display code [605] on the dial pad. The top line
of the LCD shows the engineering version of the software.
The bottom line of the LCD shows the features that are
enabled for your software, e.g., BASIC or ACD.

Speakerphone

Press the ON/OFF button to ON. (An intercom dial tone will
sound.)

Press the DSS key of the desired party or press an available
OUTSIDE LINE button and dial the number.

The speakerphone will be activated.

Press the ON/OFF button to end the call.

Summary of Contents for Digital telephone



































































































































Search results

Summary of Contents for Digital telephone

Reviews:

Related manuals for Digital telephone

Brands by name

Popular brands

Vodavi Digital telephone, User Manual

Search results

Summary of Contents for Digital telephone

Reviews:

Related manuals for Digital telephone

Brands by name

Popular brands