Vodavi Digital telephone User Manual Download

Page: 117 / 130

Voice Mail

Voice Mailbox Button

To program a Mailbox flexible button:

Press the SPEED button twice.

Press the desired flexible button to be programmed.

Dial the Mailbox feature code (460-467 = voice mail
groups 1-8; 468 = remote voice mail group).

Dial the VMID number.

SINGLE

LINE

TELEPHONE

Not applicable

Voice Mail Group Button

To program a VM GROUP flexible button:

Press the SPEED button twice.

Press the desired flexible button to be programmed.

Dial a 3-digit VM Group number (440-447=VM groups 1-8).

Dial the VMID number.

Voice Mail Group Access

To access a VM Group:

Dial VM Group number (440-447),

-or-

Press

preprogrammed

VM Group flexible button,

-or-

Use the Soft Key’s VM1 option when in an idle condition (to
access group 440 only).

Feature code 468 does not apply to

Mach I

systems.

Summary of Contents for Digital telephone



































































































































Search results

Summary of Contents for Digital telephone

Reviews:

Related manuals for Digital telephone

Brands by name

Popular brands

Vodavi Digital telephone, User Manual

Search results

Summary of Contents for Digital telephone

Reviews:

Related manuals for Digital telephone

Brands by name

Popular brands